Hi Steve, I have tried to upgrade the 4G modem firmware.  The only firmware I could find is MC7710_Global_03.05.29.02.cwe. Do you have one working with 4G?  If so can you send me the firmware you are running? Thanks Greg ... View more

Hi Steve One more question.  Will the 819 4G LTE modem also support 3G? Thanks Greg ... View more

Hi Steve, We have now upgraded software version to c800-universalk9_iox-mz.SPA.155-3.M.bin.  And I am still unable to activate the 4G modem.  Here is the readout when the router loads the image. *Oct 20 07:24:41.383: %PLATFORM-4-CELLULAR_MODEM_SKU_MISMATCH: Mismatch detected between installed modem Unknown modem on SKU type C819-4G-LTE-G. Expected modem for this SKU is MC7710 *Oct 20 07:24:57.551: %PLATFORM-4-CELLULAR_MODEM_SKU_MISMATCH: Mismatch detected between installed modem Unknown modem on SKU type C819-4G-LTE-G. Expected modem for this SKU is MC7710 sh cellular 0 all                    Warning: Mismatch detected between platform/module and installed modem.Check system log for details Hardware Information ==================== Modem Firmware Version = Modem Firmware built = Hardware Version = Device Model ID: Package Identifier ID: International Mobile Subscriber Identity (IMSI) = International Mobile Equipment Identity (IMEI) = Integrated Circuit Card ID (ICCID) = Mobile Subscriber Integrated Services Digital Network-Number (MSISDN) = Current Modem Temperature = 0 deg C PRI SKU ID = , PRI version = , Carrier = Any ideas? Thanks Greg ... View more

Hi Steve, Thanks a lot! We have a use case that we are installing next week in a factory line. The PLC communicates via modbus to the a Pyhton app in the IOX. In the meantime we are using a ADSL line with modem for connectivity to a server in the cloud but would much prefer a 4G solutions. Thanks Greg Greg Kopels ENGINEER.NETWORK CONSULTING gkopels@cisco.com<mailto:gkopels@cisco.com> Phone: +972 98646002 Mobile: +972 506778930 Cisco Systems Limited 32 HaMelacha St., (HaSharon Bldg) P.O.Box 8735, I.Z.Sapir SOUTH NETANYA HAMERKAZ 42504 IL Cisco.com<http://www.cisco.com/> Think before you print. This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/index.html ... View more

That is correct!  I now see my mistake.  Because I had configured the unit without NAT I didn't see the PAT config. Thanks!!! Greg ... View more

Hi In section 4.3 Configure Local manager Web Interface it incorrectly states to connect to the WAN interface GE with https port 8443.  However, I found that I could only connect to the host address that you configure under the IOX commands. Thanks Greg ... View more

Hi Patrick Is there a migration file for CG-OS 4.4?  I am having problems down grading to 4.3 and the current migration file is not working with CG-OS 4.4. Thanks Greg Software   BIOS:      version 12 Production   BIOS:      date    06/27/2012   CPLD:      version 20   loader:    version N/A   kickstart: version 5.2(1)CG4(4)   system:    version 5.2(1)CG4(4)   kickstart image file is: bootflash:///cgr1000-uk9-kickstart.5.2.1.CG4.4.SPA.bin cgr-1120# load bootflash:mig-copy Loading plugin version 5.2(1)CG4(4) ###############################################################   Warning: debug-plugin is for engineering internal use only!   For security reason, plugin image has been deleted. ############################################################### Successfully loaded migration plugin!!! Migration setup failed Thanks Greg Kopels ... View more

Hi Lin I am running CG-OS4.4 and am having troubles with the migration file.  Do I need to downgrade to CG-OS4.3? Thanks Greg Kopels ... View more