About chrisb

chrisb · 03-01-2013

Hi EveryoneI recently had to deploy about 4 cisco 1131 AP's to one of our branch location. When configuring them on the controller, i needed to put them in HREAP mode. As soon as i do that and the AP needs to reboot, it will continue to reboot in a l...

chrisb · 03-05-2013

Rebooting the controller is what fixed the issue.Thanks Scott for all the help.Regards

chrisb · 03-04-2013

At this point, i can't do anything from the web interface, so i cannot change any setting. What i do is use the rcovery mode, clear lwapp private-config , and then i can reconfigure the AP. If i set it up as local, and test the reboots, it all works ...

chrisb · 03-04-2013

HiI guess this could be possible, but that would mean i have 4 AP's with faulty radios...not used to seeing such issues with Cisco devices.

chrisb · 03-04-2013

HiYeah it originally downloaded the image from the WLC. It's only after i change mode to H-REAP and hit apply, this happens.Thanks

chrisb · 03-01-2013

Software version on the WLC is 4.1.192.35MIn my troubleshooting steps, i came to wonder wheter im getting a bad image from the WLC once it starts downloading.It would be the only thing that could explain all 4 ap's going bad.Thanks

Member Since	‎10-16-2012 06:08 PM
Date Last Visited	‎04-12-2018 06:01 AM
Posts	8

User Statistics

User Activity

Cisco AIR-LAP 1131 reboot in loop

Cisco AIR-LAP 1131 reboot in loop

Cisco AIR-LAP 1131 reboot in loop

Cisco AIR-LAP 1131 reboot in loop

Cisco AIR-LAP 1131 reboot in loop

Cisco AIR-LAP 1131 reboot in loop