Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,In my LAN, I have always been used an Aironet 1250 for internal use and always work fine. Now, I added a 3com AP but both AP are not correct. When I turned off the AIRONET 1250, the 3COM AP settings works fine. When both are turn on, the 3COM AP l...
Dear Steven,Now the topology has changed. I am not using VLANs anymore due to the fact I got a 3com ap and connect straight to the router internet. The settings of Cisco Aironet AP is as always do(using VLAN native and connect to a dhcp server inter...
yes. The Aironet 1250 connects to a DHCP server in the range 10.150.x.x and the 3com AP connects to a range 192.168.1.x. The DHCP servers are in different places and there is no any possibility that they could overlap one and another.But I realized ...
Hi Scott,I did as you told me but the problem persists. The AP 1250 cisco was set to channel 1 and the 3com AP set to channel 11.I dont know what to do.thanks you very much for any help.Fernando
