Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a ASA 5510 firewall on the outside of my network. I can view a web camera internally after logging into the camera with no problems. On the firewall I created a NAT entry to connect a extenal IP to view the web camera from a public IP. For ...
I have the exact same scenario with the AD/ACS authentication and using WLC and WCS to manage the wirleless network. The problem only occurs with the newer Intel Centrino Advanced-N 6205 as the bit older Advanced 6200-N does not have the problems.My...
We tried it with the skinny inspect off, but that still did not allow thevideo to come thru. The only thing that worked was changing the port of the DVR, which is pretty simple to do. So we just changed port to 2001 and then open it up in the firew...
Thanks for the response.It was not so much that ports were being redirected but rather the Q-See DVR uses prot 2000 as the default for the video. Since this is the port that phone traffic uses, then the Firewall was doing something to the packets wh...
Were you ever able to figure out the issue with this problem. I have a similiar issue with a ASA and not a PIX. I have tried the any any Permit all ip with no luck.Thanks
