About Prashanth Krishnappa

Prashanth Krishnappa · 06-29-2012

Nexus 5010/5020 are Unified fabric switches which support Ethernet and Fibre Channel over Ethernet(FCoE). In Nexus 5010/5020, by default, class-default ethernet traffic goes into a separate drop class queue(qos group 0) and FCoE traffic goes into a n...

Prashanth Krishnappa · 04-03-2021

There is a cosmetic bug for this https://bst.cloudapps.cisco.com/bugsearch/bug/CSCua65869

Prashanth Krishnappa · 04-03-2021

Nexus 56128 only supports N56-M24UP2Q expansion modules

Prashanth Krishnappa · 08-29-2013

ArnoldNexus 7000 does not support Native FC or FCIP. So you have native FC, you will need a storage switch such as MDS to do FC and FCIPThanks-Prashanth

Prashanth Krishnappa · 03-09-2013

Hi MarcIts ok to NX-OS mismatch between the switches in the vPC domain. If your end systems are dually connected, the should not have lost all communications as long SW2 was still up and operational.Thanks-Prashanth

Prashanth Krishnappa · 03-09-2013

Hi ThomasI do not understand your intended topology. Will you be connecting Active firewall to one Nexus 5k and the standby firewall to the other Nexus 5k? Why do you say the secondary vPC peer sending traffic northbound is a problem?Thanks-Prashanth

Member Since	‎12-14-2000 04:08 PM
Date Last Visited	‎04-12-2023 12:04 PM
Posts	5,081
Total Helpful Votes Received	2205

User Statistics

User Activity

Configuring Jumbo Frames in Nexus 5010/5020 series switches.

Re: upgrading power sequencer on 5548UP Switch

Re: N5600-M12Q can be deployed on N5K-C56128P chassis as well?

IBM V7000 with Nexus 5548UP and Nexus 4000 Design/implemetation

Nexus 5596 VPC Non-ISSU Upgrade

Nexus 5K <-> CheckPoint <-> 5K design question