Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I have a 2960 and i need it so that e.g. vlan 5 gives a 172.28.15.100 or above, Vlan 10 172.28.17.100.
Can someone advice further.
Many Thanks
Abdo
Hi All,
I am setting up two 2960 cisco switches, set up two vlans (Vlan 1 (default) Vlan 5). i configured gi1/0/1 to be a trunk port for both switches using :
en
conf t
int gi1/0/1
switchport mode trunk
switchport trunk allowed vlan 1-1000
and i...
The DHCP server is on the same vlan e.g.
DHCP Server: 172.28.15.50 255.255.255.0
vlan 5: 172.28.15.254 255.255.255.0
172.28.15.254 is the default gateway.
Hi there,
I have done that but the machine that is plugged into vlan 5 is getting a 169 rather than a 172.28.15.x address. Please see the attached Config.
