About Shane.Toumey

Shane.Toumey · 07-18-2017

Hello, Is there a way to get an ASA to load a different default .bin file after a factory reset? For example, I have a 5505. After performing a factory reset on it, it boots to asa724-k8.bin which produces a number of errors during the boot process...

Shane.Toumey · 07-14-2017

Hello, ASA newbie here, so please forgive any rudimentary questions I may have. I'm trying to setup an RAVPN between an ASA 5510 as the server and an ASA 5505 as the client device. I have each device working normally by themselves and they are prov...

Shane.Toumey · 07-07-2017

Hi folks, ASA newbie here. I had what I thought was a decent grasp on how to configure a 5505 from factory settings, but I'm having trouble with some basic functionality. Currently I'm unable to ping out from the ASA itself to anywhere on the outsid...

Shane.Toumey · 07-18-2017

Reminder too, if you rename the file(s) in this way, be sure to update your boot commands. In my case it's now:boot system flash:/asa924-k8.binboot system flash:/2asa724-k8.bin

Shane.Toumey · 07-18-2017

So when I did dir flash, asa724-k8.bin was indeed showing up before asa924-k8.bin. I ended up having to rename the 724 file (just put a 2 in front of it) and that put it at the bottom of the list. Afterwards I did a factory reset and 924 loaded fir...

Shane.Toumey · 07-18-2017

So after a factory reset, I'm guessing it goes in alphabetical order when looking for a boot file? Is it possible to rename the .bin files then so the one I wanted showed up and loaded first?

Shane.Toumey · 07-17-2017

As of right now, I'm trying to RDP a host on the VPN client's inside network from a host on the inside network of the VPN server. Wouldn't that packet tracer command be correct in that case? Regardless, here's the output of the command you asked fo...

Shane.Toumey · 07-17-2017

I did make some progress. I was able to ping a host on the VPN client side's inside network from a host on the VPN server's inside network. Still unable to RDP however. Here are the results of the troubleshooting commands you suggested. I tried th...

Member Since	‎07-07-2017 12:50 PM
Date Last Visited	‎08-18-2017 03:57 AM
Posts	13
Total Helpful Votes Received	15

User Statistics

User Activity

Change default boot file on ASA

RAVPN between 5510 (server) and 5505 (client)

Unable to ping out from ASA 5505

Reminder too, if you rename

So when I did dir flash,

So after a factory reset, I'm

As of right now, I'm trying

I did make some progress. I