About bumbarger

bumbarger · 04-16-2002

Plugged the following commands into my PIX 515 FW:static (inside,outside) tcp 1.1.1.1pop3 192.168.50.10 pop3 netmask 255.255.255.255 0 0static (inside,outside) tcp 1.1.1.1smtp 192.168.50.11 smtp netmask 255.255.255.255 0 0static (inside,outside) tcp ...

bumbarger · 06-13-2002

I hate to differ with either of the earlier answers, but in my opinion the best option (may not be the cheapest) is to go with Cisco Aironet Bridges in each of your cabins. Hard mount the bridge in an inconspicuous place in the cabin (you can put t...

bumbarger · 04-16-2002

Nevermind I figured out the answer to my own problem. Thanks anyway!

bumbarger · 04-16-2002

If you haven't configured your PIX, here is a basic config document to walk you through.http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/config/bafwcfg.htm

Member Since	‎04-16-2002 09:57 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	4

User Statistics

User Activity

PIX 515 with static PAT

Re: Small Wireless Solution

Re: PIX 515 with static PAT

Re: PIX 515