Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've just recently upgraded to IE 6 sp1. Since doing so I can not connect to my Pix 506 via PDM.It prompts about the certificate, I say ok, and then prompts for my user name and password, of which I supply.A new window pops up but it is a white IE ...
Here's my scenerio:I have a wireless network with 3 access points and a Win2k Server acting as DHCP, WINS and VPN server for the wireless clients.I want to stick the PIX between the access points and Win2k server.My question is, will the PIX allow me...
I've got a PIX 506 setup in a test lab. I'm allowing Telnet and ICMP through.Machine A insideMachine X outsideMachine X pings machine a. No response. Machine A pings X, response received. Then machine X can Ping A.Once X pings A, Telnet works.It'...
Here's the info:I have a wireless network that has 30 laptops. They get their IP address via DHCP from the VPN Server (Win2k). VPN box has two nicsExternal 192.168.101.xInternal 192.168.100.xPIXExternal: 192.168.101.xInternal: 192.168.100.xCorp ...
You have to give the PIX the IP address of the machine that you are using to access PDM.Also, You need to disable your proxy settings if you are using a Proxy Server.
First of All, Thanks for all of the responses!The 506 does have the sh commands. I added the static route, see routes below: It would not let me add 192.168.101.249 255.255.255.255 192.168.101.249 1 on the inside as it said that it had the same met...
