Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a PIX 515E and when I do not enable NAT-T, my VPN client behind the PAT environment cannot connect to my VPN Server, but my remote office IPsec router can connect back.If I enable NAT-T, my remote office IPsec router cannot connect back to th...
When trying to establish a VPN connection from a VPN box to my firewall PIX 515E, I get the following in the debugs. Any ideas?crypto_isakmp_process_block:src:Y.Y.Y.Y, dest:X.X.X.X spt:500 dpt:500OAK_MM exchangeISAKMP (0): processing SA payload. mess...
When I connect from the inside of the PIX(192.168.150.0) to a DMZ1 works fine, but when trying to connect from a network (192.168.146.0) in the DMZ1 that is behind two routers it doesn't work.The configuration is like this:Net(192.168.146.0) --> Rout...
I have a PIX 515 and VPN client 4.01. When I use a dial up connection the tunnel works fine and I can see the internal network, but when trying to connect from another network (I suppose they have some firewall) or from my GSM phone (GPRS) the tunnel...
I get the log 305005 ("Translation group found for ....")only for two specific machines in my DMZ1 trying to connect to one specific machine (172.16.Z.Z (mapped)) that is in the inside interface.My config is like this:nat (inside) 1 0.0.0.0 0.0.0.0na...
Yes there is connectivity between the peers, but any computer on the other network can ping my network. Actually I had other VPN connection to my network working fine, but when trying to add this new VPN connection (with other client) I get those log...
The network 192.168.146.0 is connected through the two routers to the DMZ1 as a matter in fact in some cases I can telnet some servers in the inside (using static address) or use the internet trough the pix output connection.In other ocasions using t...
The 192.168.150.0 address is from the inside any it was only a reference. The problem is trying to connect from a network (192.168.146.0) that its behind these two routers: ROUTER1(E0:192.168.146.1; S0: 211.1.1.1) --> ROUTER2(E0:192.168.147.1; S0:21...
