Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have two routers (A & B) configured in HSRP on a VLAN and speaking EIGRP on that VLAN. The EIGRP routes are announced by both routers via their own IP address on the LAN and not via the "stanby IP address".Is there any way to force the announces t...
On our network we have two PIX-520 in failover configuration.Today, for the first time in five years, the active PIX startedgenerating thousands (almost a million in 15min) of messages:%PIX-3-211001: Memory allocation ErrorThe failover PIX didn't swi...
We have a network with some cat4000 configured as VTP serverand several cat 2900/2950 configuired as VTP clients.The cat 2900/2950 support a maximum of 68 VLANs andwe have 63 existing VLANs:Maximum VLANs supported locally : 68Number of existing VLAN...
I would need to activate a 155Mbps link on a 7206 router:cisco 7206 (NPE200) processor with 122880K/8192K bytes of memoryIt is possible to insert a PA-POS-OC3 board on such a router model ?And there is a GigaEth Port Adapter for 7206 ? It seems that ...
Yes, you are right. So perhaps it is no more useful the HSRP configuration: both routers advertise their networks (including the default net) and moreover the traffic is load-balanced between the two routers!Correct ??Thank You for your answer, best ...
HI,here is the show xx commands output, taken now, not when the problem was present.. (at that time the pixwas not accessible)Thank you,Alessandro Asson---pixfirewall# sh conn count3599 in use, 9146 most used---pixfirewall# sh xlat count2793 in use, ...
