Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have several 2504 controllers running 7.3.112 code with 2602 AP's. We have Motorola MC9190 handheld RF units that periodically generate the "Call failed: TSPEC QOS Policy does not match" error in the controller log, and although I haven't been ab...
One of my guys is setting up a 2504 on a 2960 switch. The management interface is up and pingable, and from the WLC we can ping vlan 20 (our wireless client vlan) gateway. However, when we create the vlan20 interface on the WLC, give it a valid add...
Does anyone know anything about CSCsl34076? I found it mentioned in the release notes for WLC code 4.2.99, but other than that it's like it doesn't exist. The description of the bug in the release notes state "Controllers cache only one PMK per cli...
I've got a WLAN that uses WPA2 with PEAP. My MS clients take advantage of Proactive Key Caching to roam from AP to AP without requiring a full 802.1x authentication each time. My Symbol mobile devices, even though they support WPA2, are doing a ful...
I just upgraded a WLC from 4.1.185 to 4.2.112. Now none of my H-REAP AP's will connect to the WLC. It appears that they connected long enough to upgrade their code, but never reappear after the reboot. The AP ports are trunked and VLAN tagging is ...
Thanks for the explanation Rasika. However ACM/CAC is not enabled on either radio band. I must be running into yet another bug. In the long term I'll have to schedule a time with the production facility to upgrade the code on their controller (an...
Scott,Negative - not doing anything with QOS, no AAA override, etc. Anything QOS related is at defaults. We've been setting things the same way for a long time, just started seeing this with 7.3 code (at least I think).
Yes - here is what the 2960 port config is on ports 26/27. Mgmt i/f is 10, clients are 20 and 30. Prior to creating the vlan20 and vlan30 interfaces on the wlc we can ping both vlan20 and 30 gateways from the wlc, but not after. interface Gigabit...
We tried putting the vlan20 interface on the same port as mgmt i/f (port 1) and also on port 2. We stopped when we discovered we couldn't ping the vlan20 interface (nor ping the vlan20 gateway from the WLC after the vlan20 interface was created) as...
