Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I work with a PIX515. Terminating a VPN tunnel (L2TP/IPsec connection) on the outside interface works fine. But my goal is to terminate the tunnel on a perimeter interface. I have tried several things but I can't get it to work. Checking the syslog ...
I work with a PIX515. Terminating a VPN tunnel on the outside interface works fine. But my goal is to terminate the tunnel on a perimeter interface. I have tried several things but I can't get it to work. Checking the syslog shows that the udp traffi...
hi there, I work with a PIX 515. I habe vpn (L2TP/IPsec) configured to terminate on the outside interface and this just work perfectly fine. the user can establish a connection and access the necessary host on inside and dmz.now I woul like to move t...
hi therewe are using a pix 515 within our company. the only problem not solved yet is the alerting and reporting by the pix. SNMP traps and syslogd are configured and sent to a linx server server and stored into files. for logging, this is ok, but w...
I work with a pix 515. Three Zones are defined on the three existing interfaces: Inside, DMZ and Outside. Access-List grant the necessary access for users on lower security interfaces to the specific host on higher security interfaces. I also have c...
Dear YusufThanks a lot for your answer and the the link. That's right, I can terminate the tunnel on any interface as long as this interface is also connected to the "outside" world (as described in your link) but NOT when I have only one "outside" a...
But I don't want to user PPTP, I want to use an L2TP/IPsec VPN Client (Like XP/Win2K) ...How come the perimeter interface doesn't respond, is this Cisco implementation that L2TP/IPsec connections can only be terminated on the outside interface?regard...
I have tried, but it still doesn't work ... what do I have to do exactly, when I want to reach hosts on dmz with regular ip adresses (like 50.0.0.0/24) from outside?f.e.nameif ethernet0 outside security0nameif ethernet1 inside security100nameif ether...
Hi cjacintoThanks so much for your reply. My L2TP VPN tunnel terminates on the outside interface. I can reach any host on the inside subnet, but I can't reach a host in DMZ. Is this just a configuration problem? Or can I basically reach any host on a...
