Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all, We have two internet lines connection connected to e0/0 and e0/1. And it's configured as load balancing (as the supplier said). But we encounter problem in one line because of all traffic goes to one line and rarely goes to other one. ...
Hello all, We have two internet lines connection connected to e0/0 and e0/1. And it's configured as load balancing (as the supplier said). But we encounter problem in one line because of all traffic goes to one line and rarely goes to other one. ...
Hi, I am a beginner in the world of routing and router commands. So, please I need your help as much as u can. I have two 256 Kbps ADSL lines to provide internet connection to my organization. They are connected to our Cisco 3640 router via e0/0 an...
Hi, We have CSPM 2.3.3 i for Intrusion Detection System. But Can I manage PIX firewall and cisco routers from this also. Or I have to purchase CSPM f ?Best Regards
Hi, How to check the current state of the load sharing? Per Packets ot Per Destinations? Also, Should I configure it on the two interfaces?Thanks in advance.
It's already there in the "running configuration". When run "sh run" it gave me:ip route 0.0.0.0 0.0.0.0 10.0.0.138ip route 0.0.0.0 0.0.0.0 10.1.0.138Do I have to add "ip route 0.0.0.0 0.0.0.0 10.1.0.139"?
Hi, for that command ... it's already there in the run configuration:ip route 0.0.0.0 0.0.0.0 10.0.0.138ip route 0.0.0.0 0.0.0.0 10.1.0.138Do I have to add 'ip route 0.0.0.0 0.0.0.0 10.1.0.139'?The "sh ip route" for the static route is:S 10....
How do u determine that it's only one next-hop? There r two 10.1.0.138 and 10.0.0.138. Am I wrong. If yes, how to configure 2nd one? Please explain as much as u can.This is the result of "sh ip rout summ":Route Source Networks Subnets Overh...
Hi, thanks for your reply... We don't use BGP. when running the command "sh ip rout 0.0.0.0" it gives the following: Known via "static", distance 1, metric 0, candidate default path Routing Descriptor Blocks: 10.1.0.138 Route metric is 0...
