This sounds pretty straight foward. I assume you are using access points that are wired into you LAN. Each client would have a PCI-352 or PCM-352 card. You can also use a work group bridge and support up to 8 users directly from a small local area...
Note, the BR342 and BR352 are NOT compatible (you have to look pretty hard to find that out from the Cisco Documentation, but TAC will let you know... hopefully before you make the mistake).I have BR342s in place and some BR352s on the way. I have t...
Yes, your bridge can be used as an access point. You will start to get into the issue that the 802.11b standard does not account for long distances. Many people have successfully implemented 6 or more miles, but the spec limits you to 1000 or so fe...
Blue.Modal is correct. Do NOT use an antenna in each room connected to each connector. Diversity does not work that way.If the run is short, consider using LMR-400 cable. Cable loss in the RG-58 or LMR-200 will start to affect you. You loose half...
It is not appearant in the documentation, but the BR-352 WILL NOT WORK WITH THE BR-342. I almost got caught with this to. I checked with Cisco TAC and they confirmed this for me. I have been hoping they would have fixed this by now.I wish Cisco wo...