About Sanjesh Kishore

Sanjesh Kishore · 05-20-2015

Recently updated MDS9148 FW to 5.2.8d and also installed new DCNM 6.2.3. 9148 is working fine with all fcaliases and zones active. The problem is fclias is not coming up in DCNM. DCNM can see the active zoneset which can be edited and activated but a...

Sanjesh Kishore · 05-05-2015

I have single MDS9509 with dual sup modules and two fc48 port blades. Each blade ports are in separate vsan. I'd like to upgrade MDS9509 FW to 5.2(8d) as required by the storage vendor. Current FW version is 5.2(2).Can someone please provide step by ...

Sanjesh Kishore · 01-23-2013

1 x PC is showing as thick link and also all ISLs shown beside it. There are other PC created and all ISL links have been replaced by one PC link in the topology diagram. All links are up and working if viewed from CLI. Port channel created between 1...

Sanjesh Kishore · 10-13-2011

Is it possible to connect UCS 6120 uplinks to Nexus 2248 which is connected to Nexus 5000? I am trying to connect this way with vPC from each 6120 to 2 x Nexus 2248. 2 x uplinks to 1sr Nexus2248 and the 2 x uplinks to 2nd Nexus2248. The links comes u...

Sanjesh Kishore · 03-27-2011

I am connecting a new MDS9148(NX-OS 5.0) to existing MDS9509 (SAN-OS 3.3). Just connecting single ISL between the switches and created new VSAN 8 in the new switch. There is VSAN 8 in the existing switch which I want to merge into the new switch. Aft...

Sanjesh Kishore · 05-20-2015

Thanks Walter. Enable it both site. One site is now showing fcaliases but the other site is still not showing. I have DCNM installed at each site to manage 2 x 9148 at local site. Possibly looks like issue with DCNM server.

Sanjesh Kishore · 05-06-2015

Thanks Jim. Much appreciated.

Sanjesh Kishore · 05-05-2015

Thanks Jihicks. Just one clarification on point 1. Once the sup modules are done, does install all starts the upgrade on all other blades together? This is my major concern as I have two 48 port blades and each host is connected to a blade each. If b...

Sanjesh Kishore · 05-02-2013

I ended up logging a case with TAC. They resolved it by restarting FM server. The problem is with FM server components thats why it is not displayed correctly but it is correctly configured as seen from CLI. If restarting FM server does not work you...

Sanjesh Kishore · 01-24-2013

Thanks Phan.ISLs are not shown under the PC link but it is showing with it. I have logged a TAC call and one of the Tech support guys is currently looking at it. It looks like issue with FM drawing up the topology. From CLI PC is fine and all links a...

Member Since	‎03-01-2011 08:37 PM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	18

User Statistics

User Activity

Fcaliases not showing in DCNM

Manually upgrade MDS9509 with dual Sup 2A

FM 5.0 not showing Port Channel correctly

Is it possible to connect UCS 6120 uplinks to Nexus 2248

VSAN down in new switch after ISL

Thanks Walter. Enable it both

Thanks Jim. Much appreciated.

Thanks Jihicks. Just one

Re: FM 5.0 not showing Port Channel correctly

Re: FM 5.0 not showing Port Channel correctly