Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloWe are planning to upgrade the ASA license in an A/S pair by adding the ASA5500-SC-20= license.The ASA is 5545 and runs 8.6. According to documentation, after 8.3 version, the ASAs can share a license features and do not require the same license...
HelloI would like to make a list with Vendor IDs, their Hex values and their purpose.I am not aware of any document that mentions their usage and values so I would like to make one.The reason for this is that in some outputs (e.g. 'capture CAP type i...
HelloSince I have seen a plethora of contradicting posts and documentation regarding the ASA order of operations,I would like to clarify this topic regarding Routing, NAT, ACL on both pre-8.3 and post-8.3 ASA. I don't want to checkmore features since...
For me what it worked was:1. Right-click on the IDM icon -> Properties2. Check the Target and go the the mentioned directory (in my case the path was: "C:\Documents and Settings\HOST2\Application Data\Sun\Java\Deployment\cache\6.0\55\736982f7-26e9de5...
After checking the great presentation by Sasa Rasovice about the ASA architecture and doing some more tests I updated the post. More specifically, in case of destination NAT (UN-NAT), there is 'partial routing' happening after the UN-NAT which finds ...
Thank you JouniForss for your answer.Regarding your point 'What you have to notice though that IF the Primary device with the License does break down/malfunction/etc the Secondary unit might loose its license aquired from the Primary IF it reboots (a...
HelloRegarding ASA DPDs, in the post mentions that if I put the command 'isakmp keepalive disable' it will disable DPD, but testing showed that this is not always the case.Lab used:ASA1 runs 8.0(2), ASA2 runs 8.4(2)case 1ASA1 (DPD enabled) --- ASA2...
