About mvaldiviab

mvaldiviab · 02-22-2012

Hi folks,I have a problem that I cannot find out a good solution.This is the topology:Company-A send a route 10.4.0.0/16 to Our Domain through BGP. Some prefixes of this network should be learn by the Company-B.The problem is that the Company-B don't...

mvaldiviab · 11-20-2011

Hello,I have the following problem. I'm trying to advertise the default route from R2 using the "ip default-network". This is the configuration:R1:interface Loopback0ip address 9.9.9.9 255.255.255.255!interface Loopback10ip address 192.168.9.1 255.25...

mvaldiviab · 02-23-2012

I read it, very interesting!!! Could be a good solution but I don't have an aggregate route and is a requirement for this solution.

mvaldiviab · 11-22-2011

I tried with another simulator (GNS3) and it works. The problem was the simulator.Answer to my questions:R3:D*EX 192.168.9.0/24 [170/281856] via 20.0.0.3, 00:10:27, Ethernet0/0.10This route is used as the last resort so the ping to 9.9.9.9 works.R2 ...

mvaldiviab · 11-21-2011

There are different methods to configure a gateway for last resort. Here you can find some examples: http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094374.shtmlThe idea is to redistribute the default route using the "ip deafult...

mvaldiviab · 11-20-2011

The problem is not on R2. I can ping 9.9.9.9 on that router. On R3 this route should work as a last resort D*EX 192.168.9.0/24 [170/281856] via 20.0.0.3, 00:10:27, Ethernet0/0.10But it dosn't work.On R2 I have a default route that was created when I ...

Member Since	‎11-20-2011 04:43 PM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	6

User Statistics

User Activity

Redistribute with a more specific mask

EIGPR IP default-network

Redistribute with a more specific mask

EIGPR IP default-network

EIGPR IP default-network

EIGPR IP default-network