About y.haraguchi

y.haraguchi · 06-26-2007

Hi, after we install new memory and VAC+ card to upgrade PIX515E from R version to UR version, the PIX515E stop boot procedure. there is no error message.CISCO SYSTEMS PIX FIREWALLEmbedded BIOS Version 4.3.207 01/02/02 16:12:22.73Compiled by morlee32...

y.haraguchi · 06-14-2007

Does someone know how to downgrade pix515E failover? because our running PIX515E is 6.3(4) but the failover is 6.3(5) and we don't want has risk when upgrade production PIX so it's look like the best solution is downgrade failover. Somebody can help?

y.haraguchi · 06-13-2007

Hi, my internet is a IP-8 PPPoE session. Now I try to install PIX515E failover but don't know how to config. If I use fix IP there is no default gateway in PPPoE setting. Somebody can help me?

y.haraguchi · 12-19-2006

Hi, I want config a failover for PIX515E. One site is finished because it has 5 global IP. But another site only has one global IP. I check the configuration sample, each PIX515E should has different global IP in outside. What can I do? Thanks

y.haraguchi · 05-30-2005

Hi, month before our PLX515E always has problem: it reboot automaticlly and cause VPN clients disconnect. It happened 1-2 times one week, and what we can found from log file only the PIX restart.What can make it happen and how can I find out more inf...

y.haraguchi · 06-26-2007

I worked it out. just replace the battery.

y.haraguchi · 06-17-2007

Ok, I worked it out. the problem is after setting failover inside ip address, need make this failover running as Active. So the command is "failover active", not just "failover". This issue is finished. And I hope this can help other people who have ...

y.haraguchi · 06-17-2007

Thank you very much. My problem is the PIX515E is running and I need "upgrade" the failover solely. I connected failover and PC with a switch. PC can't got IP from DHCPD and can't ping from failover. I research here found a tip: "The issue here is th...

y.haraguchi · 06-17-2007

Thanks you very much! Because upgrade to high version is the next project so I will ask vender to change pppoe to fixed IP. Thanks!

y.haraguchi · 08-20-2004

Hi.have some examples or guide? I can't find in Cisco doc.Thx

Member Since	‎05-23-2002 06:19 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	19

User Statistics

User Activity

PIX515E stop after install new memory and VAC+ card

How to downgrade PIX515E failover from 6.3(5) to 6.3(4)

Help! PPPoE in PIX failover

How to config failover with only one global IP

help! PIX515E reboot automaticlly!

Re: PIX515E stop after install new memory and VAC+ card

Re: How to downgrade PIX515E failover from 6.3(5) to 6.3(4)

Re: How to downgrade PIX515E failover from 6.3(5) to 6.3(4)

Re: Help! PPPoE in PIX failover

Re: PIX525 only run as a firewall