About razelle

razelle · 09-19-2023

I'm having trouble getting an FMCv managed HA Pair of 2120s ver. 7.3.1 configured for SNMPv3 monitoring via Auvik collector. The Auvik collector are not detecting SNMP as available. I'm using the devices>platform-settings>snmp as my setup per the doc...

razelle · 03-08-2021

I have ME 8.10.142.0 setup with 4x3802s and 2x3702s. On the ME Controller's Network Summary screen for the APs I'm seeing Throughput from the 3702s with no clients associated. When I disable the radios on the 3702s the Throughput drops to zero. The 4...

razelle · 10-16-2023

Hi, I can't do that you must have a valid service contract with Cisco. Sorry

razelle · 09-30-2023

I had luck after downloading and installing LWAP version 15.3.3-JPN1 then upgrading to ME 8.10.on 3800 & 2800 APs. Good Luck ..

razelle · 09-24-2023

Changing Auth and Encrypt type to use sha256 & aes256 fixed the issue.

razelle · 09-21-2023

Thanks for the reply. I'm using the default security of sha & aes(128). The FTDs and Auvik collector can ping each other but from the collector's Auvik shell portOpen test shows 161 as not open on the FTDs. Working on it.

razelle · 01-16-2023

My TAC engineer just confirmed the Talos work to resolve the memcap issue. "Yes, TALOS have been working with the Engineering Team for the last week or so to revolve the Security Intelligence URL: memcap issue.

Member Since	‎05-07-2013 05:47 AM
Date Last Visited	‎07-25-2024 05:42 AM
Posts	20
Total Helpful Votes Received	10

User Statistics

User Activity

HA Pair FTD Ver.7.3.1 SNMPv3 problem

Throughput shown on Mobility Express Network Summary from Capwap 3702Es with no client associations

Re: Lets figure out the U-BOOT flash procedure together. (TAC UNLOCKED

Re: Lets figure out the U-BOOT flash procedure together. (TAC UNLOCKED

Re: HA Pair FTD Ver.7.3.1 SNMPv3 problem

Re: HA Pair FTD Ver.7.3.1 SNMPv3 problem

Re: Security Intelligence URL: memcap exceeded