Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone ! I've got a PIX 515E (ios version 6.2(2), pdm version (2.1) 32Mb ram).Enabling logging and monitoring results (both from pix itself or sending to syslog server) Pix stop responding and give me some messages like:PIX IS DISALLOWING CONNEC...
Hi all, I have a little question about HSRP configuration: is it possible to configure stand-by ip address in a different subnet of Routers Ethernet Interface address ? E.g: Ethernet Address1= 192.168.1.1 Ethernet Addess2=192.168.1.2. Stanby ip addre...
Hi ! I have to set up Inter-Val routing between 1 Cisco 1721 and 1 3com 3300 with 1 port on 3 Vlan.I plan to use 802.1q standard. My question is: I have to purchase Ip plus for the Cisco 1721 or Ip base is enought ?Thank youHerman
Hi everyone ! I need to purchase 1 Cisco 2612 to migrate my network from Token to Ethernet technology. My question is : which IOS version I need to bridging token with ethernet ? Ios base or Ios plus ? Thank you very much Ermanno Boldi
Hi everyone ! I need to purchase 1 Cisco 2612 to migrate my network from Token to Ethernet technology. My question is : which IOS version I need to bridging token with ethernet ? Ios base or Ios plus ? Thank you very muchErmanno Boldi
Thank you for your answer. I'm using kiwi as syslog server and i'm using a tcp logging. Do you advise me to use UDP rather than TCP ?I'm not sure but I think tcp is the default type of loggin connection in PIX Byeerman
Thank you very much for you patience. I have to add either ppp hostname and ppp password under bri1/0 ?Under Dialer 1 and 3 I have only to add dialer number fopr the respective router callin in ? Thank youErmanno Boldi
