About Jae Hoon Choi

Jae Hoon Choi · 10-27-2019

HelloI want to do a Destination NAT using the ASA. # Diagram How can I NAT when accessing Telnet from client to router? Original Packet Source IP Address : 172.16.100.128 Source Port : any Destination IP Address 172.16.100.135 Destination Port : TCP...

Jae Hoon Choi · 08-19-2019

Hello. I need help if the EEM doesn't work because of a switch platform or EEM configuration.I configured EEM on the switch as follows:Swtich # show run!process cpu threshold type total rising 90 interval 5 switch 1!event manager applet CPU_Monitorev...

Jae Hoon Choi · 09-07-2017

Hello I am monitoring the CPU using EEM in WS-C4510R+E WS-C4510R+E's supervior engine is "WS-X45-SUP8-E" and IOS is cat4500es8-universalk9.SPA.03.03.01.XO.151-1.XO1.bin. I set it as follows. process cpu threshold type total rising 10 interval 5event...

Jae Hoon Choi · 10-27-2019

Thanks 

Jae Hoon Choi · 08-19-2019

Thanks !! I will try 

Jae Hoon Choi · 09-10-2017

Thank you for your reply. ^^ Is there a possibility that the syslog message is not generated because the set rising threshold value is too low?

Member Since	‎06-24-2011 01:01 AM
Date Last Visited	‎11-03-2019 06:25 AM
Posts	8

User Statistics

User Activity

How to ASA destination port NAT using Twice NAT.

EEM do not working in Catalyst 3650 and 3750 Switch.

High CPU management - Not occur syslog "SYS-1-CPURISINGTHRESHOLD"

Re: How to ASA destination port NAT using Twice NAT.

Re: EEM do not working in Catalyst 3650 and 3750 Switch.

Re: High CPU management - Not occur syslog "SYS-1-CPURISINGTHRESHOLD"