Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there a way on the CSS 11000 series 11154 when a request for a url comes in default to port 80 to edit the http host header on the backend to change to a different port number then when returning to the client change it back to port 80.example def...
We have a 6509 with dual sup 1a and MSFC/PFC 6.3(6)installed. I have a server that was placed on one VLAN and only 3 other VLANs including my workstation is on can ftp to this server quickly. Workstations on other VLANs have slow performance to conne...
Also I have 3640 routers connected to the 6509 should I enable MLS on the 3640 routers maybe but no servers on the slow VLAN use them. The servers, workstations, and test laptop all go straight to the catalyst 6509.
I'm not too familiar with Qos commands should i be looking for certain set or on the MSFC config commands. The int VLAN are pretty bare bones no NAT, ACL, or Policy Base Routing. There are VLANS that have PBR but there not going to the slow VLAN. I a...
The workstations are different brands and i even used a laptop to connect to diifferent vlans and the results are the same. Slow on certain VLAN and fast on the other vlans. So i'm using the same laptop for the test and same hardware. Ports are set t...
