Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello I am migrating my DC to dual stack .Now i am facing one problem :On server i have assignd Ipv6 address via manual : fdd2:1fb0:0d7e:3939::3/64fdd2:1fb0:0d7e:3939::4/64On L3 switch configured 2 Vlans : Vlan 20------- ipv6 addesss using eui-64 -- ...
Hello i have two routers connected via gigabet interface . I have assinged 2 ips 2405:8a00:000a:0003:0000:0000:0000:0010 & 2405:8a00:000a:0003:0000:0000:0000:009 /126 . but these ips are not pinging to each other . pls suggest where i am worng .
Hi..FW internal interface from the L3 is also not pinging. You can see the IPv6 access rule on the firewall .pls suggest ...On L3 switch i have only configure ( I have change the private ip to public ip )enabled ipv6 unicast routing!interface vlan20...
Hello Harold ...I am able to ping Vlan 90(FDB5:4CE6:7C10:831D:FA66:F2FF:FEB1:1C7F ) through which the fw is connected with L3 switch but not able to ping fw internal interface from the servers . what configuration i need to configure on the fw ?