Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI have a C887VA-M and am trying to configure it to connect to my ISP (Zen) using a BT Openreach modem, i.e. a via a PPPoE connection. Note I am not trying to set up VDSL directly (as I already have the ADSL RJ11 successfully configured for a differ...
HelloDoes anyone know if it's possible to see the elapsed time taken for the latest keep-alive response for a given service?Presumably the CSS knows it (since if it's less than 2 seconds before the next one is due to be sent the service is flagged as...
I have an 1841 with ADSL WIC and am tyring to connect a Win XP client PC to a remote network running a Windows VPN/RRAS server. In other words, I just need the firewall to pass through PPTP/GRE. If I use the PC with an analogue dial up connection I c...
In our new pre-production environment we have several servers connected to a 3750 switch, which is then connected to a CSS 11503. Upstream the CSS is then connected to an ASA firewall pair. The CSS VIPs are 10.22.1.0/24 on the "outside" and the serve...
Are CSS11500's EOL? Any EOL announcement is not mentioned here:http://www.cisco.com/en/US/products/hw/contnetw/ps789/prod_eol_notices_list.html or on the CSS 11500 page:http://www.cisco.com/en/US/products/hw/contnetw/ps792/index.htmlThe CSS 11500 pro...
I think the point is if you're using src or src+dst routing then it's not really round-robin as soon as you have a skew in source IPs.Where I've seen it is if you have an enterprise app with all users coming through a firewall (perhaps from a branch ...
Hello Giles,I'm interested that your certificate has a year's validity.I haven't tried this yet but according to the 8.2 docs it looks like only 30 days:http://www.cisco.com/en/US/customer/docs/app_ntwk_services/data_center_app_services/css11500serie...
You'll see on the ioshints blog that Luis Santos suggested a workaround to pass GRE traffic through in both directions - check the URL in my original post.Unfortunately by that point I had reverted to my old interface-based config so I didn't get rou...
This is all working like a dream now! Just to recap, here are the important parts of the final config:circuit VLAN1ip address 10.21.1.100 255.255.255.0circuit VLAN2ip address 10.22.1.1 255.255.255.0service pulpldp001ip address 10.21.1.6activecontent ...
