Is it possible to have a Firewall one side and establish VPN tunnel with a VPN concentrator on the other side?The same VPN conectrator is also supposed to take care of Remote access connectivity to about 20 users.
Hope you have taken care of the following:1. You have to dedicate one interface from each of the firewall (other than inside and outside interfaces) for the failover.They have to be connected using a cross-over cable (suggested) or through a switch (...
1. DMZ is less secure than the inside network. That is the concept of DMZ. 2. The reason why you want to put your Citrix server on the DMZ and the MSSQL server on the inside network is that, if somebody breaks into the citrix server and hence the D...
I agree with Marcos. I am not too sure whether the question is for VPN or VLAN.If it is VPN, site to site VPN between a firewall and a router or firewall and firewall should be no issue at all. If it is remote access VPNs, you may want to consider ...
The most ideal design would be the Dual DMZ implementation design. Of course you need to have two interfaces on the firewall only for the concentrator - apart from internal, external and any other DMZ you might have. Some of the benefits of this de...
You can use the same IP for both the Static translation and MX entry (for SMTP traffic). We have implemented a number of projects where this is being done and it just works fine.Regards / Sampathsampathsr@samw.com
