About Phil Williamson

Phil Williamson · 03-29-2017

I'm wanting to limit login access to my ASA5515 by changing the priv level for LOCAL user accts Quoting Cisco:If you do not use command authorization (the aaa authorization console LOCAL command), then thedefault level 2 allows management access to p...

Phil Williamson · 03-18-2017

Given these addresses and ACLs:!interface GigabitEthernet0/0 nameif outside security-level 0 ip address 192.168.1.1 255.255.255.0!interface GigabitEthernet0/1 nameif inside security-level 100 ip address 10.1.1.254 255.255.255.0!object network WebSer...

Phil Williamson · 04-11-2014

Is this a 5515-X or just a 5515ciscoasa# show versionCisco Adaptive Security Appliance Software Version 8.6(1)2Device Manager Version 7.1(6)Compiled on Fri 01-Jun-12 02:16 by buildersSystem image file is "disk0:/asa861-2-smp-k8.bin"Config file at boo...

Phil Williamson · 04-09-2014

I'm looking for the best solution to this problem:Moving from one data center to anotherNetwork is live/in-use at both DCs nowOld DC has ASA5510 v8.2(5)New DC has ASA5515-X v8.6(1)How can I best port the config from old to new? Manually going thru l...

Phil Williamson · 03-26-2014

Need some advice on how to tackle some wireless issues, concerns and questions.- The network looks like this:Data Center with only one AIR-CTC5508-K9 (v7.4.115.0) supporting 125 LAPs; there are plans for a redundant pair.50 offices connect to the DC ...

Phil Williamson · 03-19-2017

Ajay, Your answer was concise and to the point and also noted that option 2 would better fit the needs of smaller businesses which may not want, nor need to purchase large blocks of routable IPs. I'm not sure I've ever seen this stated as such befor...

Phil Williamson · 04-11-2014

Marvin,I got the FWM acct setup and submitted my 8.2(5) config. What I got back is not useful.The accompanying conversion log file indicated all interfaces in the 8.2(5) config and their IPs, nameif and security-levels were ignored. The resulting c...

Phil Williamson · 03-28-2014

Manannalage,Thanks for the very informative and helpful reply. The Ciscolive presentation is just what I'm looking for. It's amazing what a combination of well executed pictures and supporting text can do to illuminate an otherwise complicated situ...

Phil Williamson · 09-18-2013

Scott,The HA option is what we will use. I was incorrect about not using DNS to resolve the controller.Thanks for the suggestion to swap the primary/secondary WLC IPPhil

Phil Williamson · 09-17-2013

Rasika,I believe the WCL address was/is hardcoded into the original deployment - not DHCP or DNS.I will have to ask my client.If this is the case then it may be necessary to visit each LWAP before the colo move and set a DHCP reservation - we want to...

Member Since	‎07-17-2002 05:13 AM
Date Last Visited	‎10-09-2017 12:28 PM
Posts	169
Total Helpful Votes Received	10

User Statistics

User Activity

Limit ASA login access with LOCAL AAA database

ASA5500 8.4 NAT versus PAT

ASA 5515 versus 5515-X

Port configuration from ASA5510 8.2(5) to ASA5515-X 8.6(1)

Help with wireless design, 802.1x security, BYOD, RADIUS, ACS

Ajay,

Marvin,I got the FWM acct

Manannalage,Thanks for the

Re: Remote telnet/ssh/http access to LWAP CLI

Re: Remote telnet/ssh/http access to LWAP CLI