Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,i hope that you will help me on this strange issue .we are trying to configure the vpn with our provider we are on Asa and the use Checkpoint , vpn seem to be established on phase 1 and phase 2 too.bur when i send ping packets seem to los o...
Helloi have a problem with vpn connection between ASA5505 and router 3825.behind ASA we have a server which is serving on specific port. If for some reason link is disconnected the VPN will not become active if we do not generate a traffic from ...
Hello,We have from 2 days an error message shown from ASA5520 on syslogserver.I am troubleshooting in order to find any mac or anything else for source of problem.It is important to tell that they are two ip from domain controllers which generating t...
I am receiving the following error when I try to establish an IPSEC tunnel in one of our branch .*Jan 19 14:16:37.059: %CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac verify failed for connection id=2009 local=172.16.16.6 remote=172.16.16.1 spi=4A4D2438 se...
I am receiving the following error when I try to establish an IPSEC tunnel in one of our branch .*Jan 19 14:16:37.059: %CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac verify failed for connection id=2009 local=172.16.16.6 remote=172.16.16.1 spi=4A4D2438 se...
hello,phase 1 of VPN is established normaly and i see tunnel normaly as other tunnels when sh crypto isakmp Sa writenals o phase 2 is established , encapsulation is in place but decapsulation has no count, it seems that packet is loss in tulen and is...
Hi Prapanchatteached you will find two txt file with debug on asa and router. please be informed that on router are terminated other vpn from other sites.outside ip of router where is build VPN is 10.10.10.1 and outside ip of asa is 10.10.10.14thanks...
hello,i have same issue whith the other asa 5505 firewall. i have same configuration as the first one which is working now.the problem is same even i have downgraded the image to 8.2.1.the tunnel can only be initiated on one site form asa side. if th...
