Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible that the recvoery code is the problem? I have other APs like this that work but they run C1200-k9w8-mx.124-23c.JA4.The ones that don't work are running the recovery image from cisco.com c1200-rcvk9w8-mx.I tried to TFTP the code off a ...
I've used the debug pm pki command on this AP and in the past, but it doesn't show anything for this AP.The WLC doesn't have an individual AP manager interface. The management and AP manager interfaces are merged into the managemant interface. It ha...
This is what it tells me:flashfs[0]: 4 files, 2 directoriesflashfs[0]: 0 orphaned files, 0 orphaned directoriesflashfs[0]: Total bytes: 7741440flashfs[0]: Bytes used: 1755648flashfs[0]: Bytes available: 5985792flashfs[0]: flashfs fsck took 9 seconds....
I got this off the controller...(Cisco Controller) >show ap join stats summary 00:13:19:c8:f9:b6Is the AP currently connected to controller................ NoTime at which the AP joined this controller last time...... Not applicableType of error that...
The only firewall is outside of the core. I tried placing the AP on an AP VLAN with other working APs and also on the controller VLAN, neither worked. I don't know if I can run debugs on the AP becuase it's running the recovery image hosted at http:...
