Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,there is a PIX 525 with 7.2(2) running.The following issue occured:- suddenly the PIX cannot find a route to one specific host- There is a static route to the net in which the host resides. - The hosts one figure above and below are reachabl...
Hi there,we have got the following problem:One of our customers is connected via VPN-Software-Client. Our peer is a concentrator. We are using private IPs in the following range 172.28.0.0 to 172.32.255.255.The customer is using IPs 172.16.0.0/13.Whe...
Hi,thank you for your reply.Unfortunatelly the routing table is too long to post here and I am also not allowed to post it. The host which is not reachable is in the same static route included like the hosts which can be reached (even in the case of ...
Historicaly there is static NAT configured. The source ip stays the same on the translated interface.In the new IOS there is additionaly "enable traffic through the firewall without NAT" enabled.In the firewall log is the following entry:%PIX-6-11000...
