Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, We recently updated to TC7 and are taking a look at the new diagnostic tabs. I see 0% packet loss consistantly on the majority of the calls but I see a large variance in the Max Jitter numbers everywhere from 4 to 63. I was wondering what do...
Does anyone know where I can download the L6.1 software for the 150MXP? I looked all through the Cisco software download area and couldn't find it.Thanks,-Steven
Hello, I am enabling the AD authenication for our MOVI users and I ran into an issue with our active directory accounts being locked out. I have a MOVI subzone setup on our VCS-C that is set to "Check Credentials" and subzone rules pointing MOVI use...
Hi Guys, I am working on firming up the call policy on my VCS Expressway to try to better intercept the SIP spam requests it is getting from internet ip numbers. Right now those spam requets are getting rejected by the loop detection but I want to i...
Hi, I have a TMS system (13.0) and a mixture of C20, C40, and older MXP endpoints. While trying to track down a video issue I was having, I noticed that the TMS is not showing any of the conferences involving the C series codecs under the packet los...
Ok, so Cisco's jitter is measured in milliseconds. So if I do have a 60 ms or so max jitter, that is really only 2-4 frames depending on call settings. In my thought, that shouldn't really be noticable on the end user side.
1. Yes, we have TMSPE deployed. 2. We are running 13.2.1 for TMS and x7.2 for VCS-C 3. AD servers are Windows 2008 SP2 4. I don't access to a test ID but I checked with server team and the 6 attempt lock out is part of the group policy for all users...
