Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there. I have an ASA with an inside interface 172.16.15.0/24. Behind that is a switch with the port configured in VLAN 1615 and the ASA connected to that port. A host is on the same VLAN with IP 172.16.15.10. Cannot ping the ASA interface from tha...
Hi guys, I have a UCS C220M4 and it was running CICM 2.1 and CICM was accessible and functioning. I upgraded to 4.1 and I get the login page but any attempted login does not work, it just sits there, for days with a cog spinning endlessly. Have tried...
I have recently acquired a 5548 and simply want to use it as a L2 device with UCS servers connected to it.
It has the following licences attached:
N5k-PDC-01# sh license12.lic:SERVER this_host ANYVENDOR ciscoINCREMENT LAN_BASE_SERVICES_PKG cisco...
Hi guys, I have the setup loisted in the title of this post and need some assistance re configuring all of it so VMs on the C210 servers use the 10GB cards in the UCS servers that are patched directly to the Nexus. Not sure where to start.
Nexus is...
Hi guys, I have added this CNA to the UCS server and drom CIMC I only see it as a PCI device, not a network adapter. I need to see it as a network adapter so I can configure VNIC on it. How do I ensure CIMC sees it as a network adapter?
Hi again and yes I was using Rufus to do the “normal” systems upgrade, and then after failure I was using the linux approach to extract bios.cap from the huu archive. What I learnt after a while is you simply can’t try and use a copy of the same BIOS...
I managed to solve this via CIMC using C220M4.4.0.2f.0.1113190831. Uploaded and then activated, the system auto rebooted. Thanks again Kirk for a quick response.
Hi Kirk and thanks for the reply.I have done the drill down on huu BIOS and obtained the boot.cap file for the same version I am running and one later version, but each time I insert the USB into any external or internal USB slot on the chassis, it d...
Hi and is this assuming you have a preloaded, or "used" BIOS already accessible in CIMC or do I simply download an earlier huu and extract the bios from there?I obviously have the same issue here
