Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,For Hyper-v is it possible to access the iSCSI data lun through the same vNIC thats used for boot luns?I have a hyper-v host boot from IP SAN through two vNIC ( iSCSI-A and iSCSI-B) with vlan 20 and 21 respectively. Now I need the hyper-v hos...
Hi Guys,I'm seeing a lot of tx errors on the FC uplink port of the FI ( both the ports of SAN port channel). I'm trying a EMC SAN boot one of the Blade and it fails with IO error. My question is if I have an issue with the LUN or EMC SP port or on ...
Can someone help me in configuring multicast policy in UCS.I have a redhat cluster heartbeat on vlan 300. I have configured a multicast policy and applied to that vlan.I'm not sure i have configured correctly:IGMP Snooping state: enabledIGMP snooping...
Hi there,Can someone tells me is it recommended to use the vSwitch LB option "route based on IP hash" insted of originating port id in a UCS environment.I have 2 NIC's active active to the vSwitch ( FabA and FabB) and it was set to origination port I...
Hi,I have an issue with one of my blade server with the Bios post completion error. The server is hung at the discovery.I have tried reseat the blade, the tried to recover the corrupt BIOS and it failed.This is a new server and no SP attached. Is th...
Thanks Guys , I have created a new multicast policy with IGMP snooping disabled(by default its enabled) and assigned the policy to the vlan and everything start working.Jibby
Thats a NetApp question , VIF failover happens at the NetApp side. Depend on your failover configuration the partner node assumes the VIF id and pass the traffic through thats VIF.
Hi padma,Resetting the CMOS through UCSM didnt help. Its hung with same error. The blade never worked. This is a whole new setup.Initially the FI and the components of the blade comes with f/w 2.0., except the VIC1280 which has a f/w revision of 2.1....
