Buy or Renew
Buy or Renew
dreambull
Level 1
Level 1
Member since ‎03-18-2013
‎08-18-2017
Recent Badges
Awards

User Statistics

  • 12 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
See all
5 Discussion Posts
First Discussion
10 Discussion Posts
5 Replies

User Activity

Hyper-v iSCSI boot and iSCSI data lun access

11-01-2013
Hi guys,For Hyper-v is it possible to access the iSCSI data lun through the same vNIC thats used for boot luns?I have a hyper-v host boot from IP SAN through two vNIC ( iSCSI-A and iSCSI-B) with vlan 20 and 21 respectively. Now I need the hyper-v hos...

Tx errors on the FC port of the Fabric Interconnect

08-15-2013
Hi Guys,I'm seeing a lot of tx errors on the FC uplink port of the FI ( both the ports of SAN port channel). I'm trying a  EMC SAN boot one of the Blade  and it fails with IO error. My question is if I have an issue with the LUN or EMC SP port or on ...

UCS Multicast policy

05-23-2013
Can someone help me in configuring multicast policy in UCS.I have a redhat cluster heartbeat on vlan 300. I have configured a multicast policy and applied to that vlan.I'm not sure i have configured correctly:IGMP Snooping state: enabledIGMP snooping...

vSwitch load balancing with UCS

05-23-2013
Hi there,Can someone tells me is it recommended to use the vSwitch LB option "route based on IP hash" insted of originating port id in a UCS environment.I have 2 NIC's active active to the vSwitch ( FabA and FabB) and it was set to origination port I...

B230 M2- waiting for BIOS post completion from CIMC on server

03-24-2013
Hi,I have an issue with one of my blade server with the Bios post completion error. The server is hung at the discovery.I have tried reseat the blade, the  tried to recover the corrupt BIOS and it failed.This is a new server and no SP attached. Is th...
View more
Community Statistics
Member Since ‎03-18-2013 08:35 PM
Date Last Visited ‎08-18-2017 04:00 AM
Posts 12