Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I'm troubleshooting a peculiar problem and have got to the firewall logs and have confused myself. Here is the specific output that I'm referring to:2011-11-14 11:42:16 Local4.Info x.x.x.x Nov 14 2011 11:42:16: %ASA-6...
As per the subject, we are receiving this error in the log buffer on a 3845 router running 12.4(24)T4. Our setup is that we're running DMVPN, and have configured per-tunnel QoS for DMVPN, exactly as per the Cisco documentation (http://www.cisco.com/e...
Update: I have successfully trialled this using Dynamips/Dynagen; the addition of a physical interface, using that for DMVPN WAN routes and the tunnel source meant the per-tunnel QoS finally appeared on the tunnel (using "show dmvpn detail"):HUB#sho ...
Thanks, Mike that's all very useful information; I'll be talking to our ISP (as I said, part of the same company, which is handy!) about the VRF-side of things; I'm sure it won't be a problem as that's what we use elsewhere on our WAN.Thanks again fo...
Hi Wen,I've been considering a solution for this and have been trying to verify using GNS3 to no avail (I can't get GNS to work - separate issue). If we were to add an additional physical, routed, interface to the hub routers do you think we would be...
Darn, I was fearful of that I will go away and think of a way round this, and will post back my results if we get a working solution in place, in case anyone else has this issue.Thanks again for your help with this, it's been much appreciated.Cheers,...
Thanks for that, Wen - I tried it and it still gives this error. However, I wonder if I've found out why now. The documentation does have the following restriction: "You cannot configure a per-tunnel QoS policy on a tunnel interface and a separate Qo...
