Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Its out! For those of you have been asking and looking for this document as much as I have, it looks like Craig Hyps has delivered! Thank Craig! http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-95-Cisco_and_F5_Deployment_Guide-ISE_...
In your print screen it shows that the syntax for each attribute is wrong. So the radius server is sending the attributes but in a format Nexus does not like. Verify the above document I referenced and create attributes verbatim.
Based off the config guide it looks like your attributes are setup incorrectly.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/security/7x/b_5600_Security_Config_7x/b_6k_Security_Config_7x_chapter_0101.html#concept_D3AE0E4C...
I would look at the radius attribute you are using on NPS for vlan assignment and make sure it matches with whatever Nexus radius attribute list. Reply back with your authorization result of what attributes your sending in your access accept and it m...
