Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a TAC case opened because according to the release notes for 9.2(1) it states that OpenSSL has been upgraded to 1.0.1e. The release notes for ASDM 7.2(1) states the same. So far the TAC engineer could not rule out that 9.2(1) indeed does hav...
How about sh tech? If that doesn't work, the IE1000 was designed to be configured via a web browser and not the CLI. So if the above command doesn't work, then you'll need to get the serial number by using a browser.
Have you looked at using the archive command rather than the kron? https://www.cisco.com/c/en/us/td/docs/ios/fundamentals/command/reference/cf_book/cf_a1.html So you would enter archive in the global configUnder that you set the path to use; in your ...
It appears that version 1.3 was the initial release. Anything prior is not available to download, the release notes for 1.3 shows open caveats resolved issues is not even listed and the release notes themselves don't have the version in the filename ...
Mine does; I was in config t in it yesterday. I can add VLAN's, modify ports, etc.
Just like this:
Switch# sh runBuilding configuration...hostname Switchusername default-administrator privilege 15 password encrypted 867c591c2fc79c3b7b689d4e5e89a39...
