Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a pair of Nexus 5548UPs that have some high priority servers running on them. Servers are ESX hosts running Nexus 1000v's. Each host has multple connections in a VPC to both 5548s. We have been having intermittant ping loss and slowness of ...
I have a few questions on how the Nexus 5500s work and also what design would be the best in our situation.Currently we have two 6513 Core switches 6513-1 and 6513-2 running HSRP and RSTP. 6513-1 is currently the Root Bridge, 6513-2 is setup as our...
mukeshjindal, Jason is correct you want to manually set a root bridge so as to not have issues when adding new switches down the road. On another note you might want to also look into "spanning-tree rootguard" or "spanning-tree guard root". This wil...
What model is the switch? What version of IOS? What are the devices that are connected (phones,pcs)? When you did a show log what did you see when this happened?
Fresh setup I would go with L2 unless you plan on using L3 for a specific reason. You need to build a Standard switch on the ESX host first to bring the Nexus 1000v up on. Once you get the nexus built you can migrate (management,control,packet) back ...
Will you please get the following from the VSM?1. Show Module2. Show SVS connectionAlso did you trunk out the packet and control vlan across this same link you are using for management? Best practice would be to seperate the links for management, con...
BGP is not supported on IP base only a few routing protocols. You need to upgrade to IP Services to get BGP.Table in link shows what is supported.http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps6969/ps5012/product_bulletin_c25-614546_ps1...
