About roboton666

roboton666 · 02-07-2012

Everyone,I have a cisco 2504 running 7.0.220.0. I am trying to configure Web Auth for External Redirect, Passthrough. I have a page created on an external web server that was taken from the Web Auth Bundle and modified. It is a simple "accept" or "re...

roboton666 · 02-08-2012

Seq# Action Source IP/Mask Destination IP/Mask Protocol Source Port Dest Port DSCP Direction Number of Hits 1 Permit 10.43.0.0 / 255.255.0.0 216.115.84.140 / 255.255.255.255 TCP Any ...

roboton666 · 02-08-2012

roboton666 · 02-08-2012

If I remove the pre-auth ACL the redirect goes into a terminal loop.If I take Web-Auth off it works just fineI can use Web-Auth with Passthrough on a local page and it also works just fine.It seems specific to the way I am setting up the external url...

roboton666 · 02-07-2012

Check out Web-Auth with Passthrough. You can use a local "Terms and Conditions" page that requires manual user intervention in order authenticate and get an IP.This won't help with getting tons of unwanted associations, but it will reduce your DHCP l...

Member Since	‎06-25-2008 10:56 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	6
Total Helpful Votes Received	1

User Statistics

User Activity

2504 Web-Auth Passthrough with External Redirect

Re: 2504 Web-Auth Passthrough with External Redirect

Re: 2504 Web-Auth Passthrough with External Redirect

Re: 2504 Web-Auth Passthrough with External Redirect

Guest Wireless Network