About cybersaga

cybersaga · 03-22-2013

I understand from this thread that the Cisco ATAs do not have any configurable field to specify which phone number should be sent as the caller ID on outbound calls.Are there any plans to add such a field?To be more specific, I have a SPA112 and I'd ...

cybersaga · 06-14-2013

As Robert said, it's in the web interface: Administration -> Reboot.Alternatively, you can use this command line rebooter, which you could even schedule if you see necessary: http://www.freymond.ca/SPA112/

cybersaga · 06-09-2013

Logs will definitely help.One thing you can check is on the Sipgate site, after you login, is there a place where it tells you if your ATA is registered? My first guess would be that it's losing registration and Sipgate is disallows calls without fir...

cybersaga · 05-29-2013

Don't worry, network routing is a complicated subject even for computer people. If you want to learn more, you can google "difference between switch and router". You're not the first to ask.Pretty much the only use for the router in an ATA is for a h...

cybersaga · 05-29-2013

"Wireless routers" do several jobs that can often be totally separate pieces of hardware:Router - Routes traffic with whatever rules you set. It can inspect, readdress and/or rewrite the data passing through if needed.Switch - Allows several physical...

cybersaga · 05-29-2013

Even if you get that working, both won't stay registered at the same time unless you use different SIP accounts. Depending on your provider, you may be able to create a separate SIP account for the second port.If you use the same SIP account on both ...

Member Since	‎03-22-2013 08:02 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	16

User Statistics

User Activity

Custom Outbound Caller ID in ATAs

How to force reboot SPA122 remotely

Cisco SPA 112 outbound call issue.

SPA122 ATA with Router

SPA122 ATA with Router

How to set up dual channel number on the spa 112