Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA running 8.2 what command would I use to achieve the same this is from an ASA running 8.4nat (inside,outside) source static LA_OFFICE_INTERNAL_NET LA_OFFICE_INTERNAL_NET destination static MKTX_INTERNAL_NETWORKS MKTX_INTERNAL_NETWORKS de...
Hi all,I'm configuring a 5505 for a remote office. Until they are assigned a static ip by the provider I will have to use the providers dhcp address. How do I construct an access list for the outside interface using the external address if I don't k...
Hi all,Wonder if someone can help me get my head around a NAT question. I understand how NAT works in a standard setup I.e the firewall or router has an interface with a public ip, but I have seen a global internet out statement on a firewall that s...
Thanks a million, this has been bugging me for a while. So even if the router has a local subnet on the 4.2.2.0 network it will still send a packet through to it's internal network 192.168.15.0 because there is a device advertising it has ip 4.2.2....
Hi thanks for the response. Hope this helpsInside-192.168.12.1--ASA-192.168.15.2--- Internet DMZ -192.168.15.1 -ISP Router--4.2.2.1 The ASA has global Internet out NAT of 4.2.2.2 and the Default route for the ASA is 192.168.15.1 How does the FW tran...
