About doxenhandler

doxenhandler · 06-14-2013

I am looking for a way to remotely monitor the number of connections per second coming in to an FWSM module in 7613 switch. If anyone knows how to do this via snmp, that would be ideal. The only command I know to expose this information is the "show ...

doxenhandler · 12-02-2013

For use on the Internet, you need addresses that are assigned by an ISP or the registry appropriate to your country (ARIN, RIPE, etc.).

doxenhandler · 06-01-2012

Madhu,Changing the inline-TCP-session-tracking-mode made a huge difference. Performance seems to be almost 2X what it was before. I was able to leave the IDS inline during a period of peak traffic (over 120Mbps counting both VLAN pairs). At this rate...

doxenhandler · 05-31-2012

Madhu,The traffic is predominantly http and https. The IDSM-2 is inline behind the firewall, so traffic is mostly https at this point. Then the traffic goes through the load balancer, where it is decrypted to http and then fed through the IDSM-2 agai...

doxenhandler · 05-29-2012

Madhu,Thanks for your response. This gives me a few places to look for clues.If I bypass the sensor, then the problem goes away, so the inspection load is definitely the problem.I have about 10 event action overrides, mostly to disable events generat...

doxenhandler · 05-25-2012

Hello Madhu,We have a pair of IDSM-2 modules, one in each of our core 7613 routers. We are using these in inline mode, with VLAN pairs. One module is dedicated to protecting our inbound internet connection. It handles two VLAN pairs, one is behind th...

Member Since	‎01-23-2009 02:43 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	5

User Statistics

User Activity

How To Monitor FWSM Connection Rate?

Re: How to configure a GRE tunnel

Ask the Expert: Intrusion Prevention Systems (IPS)

Ask the Expert: Intrusion Prevention Systems (IPS)

Ask the Expert: Intrusion Prevention Systems (IPS)

Ask the Expert: Intrusion Prevention Systems (IPS)