The response I posted above is the end result/solution to that annoying alert. I will copy/paste just the directions again.
Go to Administration > Settings > System Settings > Alarms and Events > Alarm Severity and Auto Clear... On the right side un...
go to Administration > Settings > System Settings > Alarms and Events > Alarms and Events and go to the Alarm Email Options section. Make sure that “Include alarm condition in body of email” is checked... this will help you troubleshoot what category...
I will be inquiring as to what else is covered under the alert "radio administratively up and operationally down" from TAC. I will post their reply here and also be shifting that from critical down to major as a test to see if the alerts stop. Will...
Appears I found it....
PI has detected one or more alarms of category AP and severity Critical in Virtual Domain ########### for the following items:
1. Alarm Condition:Radio administratively up and operationally down
Message: '802.11a/n/ac' int...
Phil - Thanks for posting your experience with it.. I've been working with TAC on this and can provide you some info from our discovery so far..
The channel set indeed means that the AP has switched channels, however.. the AP's let the clients know...