Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I need to change the vlan of my management network and had a few questions. I have two cores (4507's) that i created the new vlan on and started to add the vlan to the access switches (2960's) throughout the campus. is it ok to setup the new vlan ...
Hi I am adding routes to my core switches and had a quick question. If i have a route in place say 192.168.4.0 255.255.255.0 192.168.1.1 and i need to add another route 192.168.0.0 255.255.0.0 192.168.1.2 will the first route still work? or will it b...
Ok great. i did add the 4 vlan to the gbics on cores and switches. The one thing that was similar with nortel Thanks a lot Jon.This has been a huge help! The best part of my switch to cisco has been the communities and forums like this one. Not much...
Crap sorry i just found these on the top of the config:spanning-tree mode rapid-pvstspanning-tree portfast bpduguard defaultspanning-tree extend system-idspanning-tree vlan 1-4094 priority 24576 On the access switches i did't find anything that said ...
ask away i don't want to break it either, 1)The 4500's are running HSRP for the SVI's here's an example of the 241interface Vlan241 description Switch MGT ip address 172.16.241.2 255.255.255.0 standby 241 ip 172.16.241.1 standby 241 priority 110 sta...
Thanks Jon.1)All of the default clients have a their gateways pointed to the 4500's.2)each access switch is setup with a 172.16.241 address assigned to the vlan241 interfacei just went through a bunch of the switches and only found one with ip defaul...
I was planning on doing most of it remotely but will do it at the switches if needed. Right now the switch has an vlan interface (vlan241) with an assigned ip of 172.16.241.x and i want to add the new vlan interface(vlan4) with the new ip 10.132.4.x....
