Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there a way to configure the console port on a800 series (831?) for use as a terminal server async port to remotely connect to another devices console async via a telnet to the 800 series, similar tothe use of a 3600 series as a terminal server?
in reading this thread, I also see this and tested both a static route of the client pools to the outside router - that worked, but also created an inside interface (we have 2 client pools defined on this box)!define source object groupobject-group ...
I agree, it /should/ work that way, but..........on an 857 it is not working that way, or at least I've not found the correct port number to us in the reverse telnet command, so........does anyone know what the associated port # for a reverse telnet ...
I've seen all that, typically need the following:line con 0 modem enable (makes it usable like an aux port) no exec (disables the prompting and interaction to the command line ((EXEC)) by devices attached to the phy port)This answers only 1/2...
