Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, community. This issue is related to my Cisco C240M3 server which is in UCS Domain Mode. I was able to install Ubuntu 12.04 on one of the Virtual Disks I set up on it's MegaRAID controller, but I am unable to boot from my virtual disks. The loc...
Hi, Community. I have a C240M3 hooked up to a clusted UCS environment on single-wire-mode, but for some reason I am unable to boot from the network device. I've configured the RAID controller, consolodating all physical devices into one virtual drive...
Hello, Cisco community! Currenlty UCS manager shows two Fabric Interconnects, and two Fabric Extenders, but for some reason my server isn't showing up Here is the birds eye view: I have my C240 connected with two 10GbE twinax cables, each going to o...
This is a symptom of a server not having an associated service profile with a boot policy. Once I created a service profile for the server, and configured the boot policy, it booted as expected. According to the guide that you linked to on the last p...
Hey, wdey. I created a RAID 0 Striped virutal volume using the LSI utility. Below is a screanshot of how UCS Manager views the disks: It looks like vd-0 has is indeed bootable. Oddly enough, the server does not let me access the LSI utility anymore....
Hey, Keny. What you just said makes perfect sense. I will look into getting my Fabric Interconnects upstream connectivity. I need a extension module to get 1GbE ports on the FIs, right? When I had the C240 server CMIC in UCS Domain mode, these errors...
Hey, Wdey. I run a Cisco UCS 6248UP as my Fabric Interconnects. So 1Gb uplink is possilbe with this FI model? Do I have to buy the extension go get the 1GbE ports? -Miguel A.
Hey, Keny. Thanks for your attention. Essentially, I was trying to give my C240M3 internet access through our 1GbE network by connecting one of the onboard 1Gbps port to our top-of-the-rack switch. I tried doing this while CMIC was in UCSM mode, but ...
