About jordanwmcdonald

jordanwmcdonald · 02-10-2014

Hello,Scenario: I receive a single dynamic IP from my ISP via a cable modem acting as a bridge to a Cisco 3825 running ADVENTERPRISE 15.1(4)M7. Via the CLI, I have successfully configured the following on the router: NAT/PAT, ZBF, and SSLVPN. A small...

jordanwmcdonald · 01-31-2014

Hello, this is my first post and I have been banging my head against a wall for days trying to figure out this issue. I have a Cisco 1841 running the latest ROMMON 12.4(13r)T5 and IOS ADVIPSERVICESK9-M 15.1(4)M6. Via CLI (I'm studying for CCNA and de...

jordanwmcdonald · 02-10-2014

Hi Erik,Thanks for your response. I did as you recommended and slowly pieced things back together. I discovered that the "ip flow" entries on both interfaces were causing packets to go from CEF/fast switched to process switched for some reason, maxin...

Member Since	‎01-25-2014 06:26 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	3

User Statistics

User Activity

FTP/HTTP Server in NAT/PAT Scenario

Cisco 1841 Max 1.5MB/s between Fa0/0 and Fa0/1

Cisco 1841 Max 1.5MB/s between Fa0/0 and Fa0/1