Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,When exporting configuration with the 'copy current-config' command the CCO password for auto-update is visible.Anyone know if there is a way to remove/encrypt/hide the password in that file?The password is not visible in CLI with 'show config' or...
Hi,Anyone know the session idle time out value for IDM, CLI and IME? I did not find this in the documentation and I have a PCI-DSS audit coming up so this would be nice to know.IPS 4255 - 7.0(6)// Mikael
Hi,Im trying to get my lab IPS too work with our ACS server, but can't get it to work.I get a Radius reject when i try to access my IPS, wrong password.I have tried several combinations of configuration, and password, on the IPS and on the ACS.Any ti...
Hi,I have a new IPS-4240 were I cant get the managmet port to work, no green LED's.The port is connected to a Catalyst 3750 and i have tried to change cabel and port, but with no luck.I do get to set IP address on the interface, and I can ping my sel...
Hi,I'm setting up three VSS system with OSPF as IGP and MPLS ontop. |--------------mpls--------------| --vss|--ospf--|vss|--ospf--|vss--mp-bgp|----------(P)-----------|mp-bgpIn normal operation the setup work as expected with VRF's, traffic is...
After some late testing we were able to get it to work. In addition to your explanation we hade to changed the Network Access ID so it was the same as our ACS- Network Device Group name.Another thing that we noticed when testing was that if the IPS ...
