Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
It's been my experience that the migration tool isn't ready for prime time. I found it much easier to just create new policies and apply them to the new device. We moved from ASA5555's to Firepower 2110's and tried the migration, but were met with ...
Below is the fix that I had to implement on our 5516 running FTD.
rommon #1> confreg 0x1
rommon #2> boot
Once this firewall booted, the management interface was no longer shut down. Hopefully this helps anyone who comes across this issue in the f...
Below is the fix that I had to implement on our 5516 running FTD.
rommon #1> confreg 0x1
rommon #2> boot
Once this firewall booted, the management interface was no longer shut down. Hopefully this helps anyone who comes across this issue in the f...
I've had similar issues or worries over remote deployments. I've been able to connect the management interface to a public IP address in the cases where things did not go as planned. I still needed a third party on the other end to help facilitate t...
Correct me if I'm wrong, but it looks like you're just doing passive authentication. If that's the case, then you will see A LOT of unknown user activity. This is because the system will only identify users when it is able to passively ID them thro...
