Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
After upgrading, ping times from clients has gone from ~10ms to ~2500ms. I have a Cisco 7500 Flex controller, when running controller code version 7.0.220.0 client performance was as expected. When using code 7.2.103.0 performance is terrible. I have...
Hi,I am planning an HREAP deployment; a data centre with multiple remote sites. HREAP has been evaluated and meets our requirements. We are now looking at buying some equipment for this deployment. For controllers, we are considering either the 5508 ...
I have a controller running 7.0.220.0 with AP's (3502i) in HREAP mode using local switch and local auth. HP's are also in HREAP groups.I am have some issues gathering statistics. When HREAP is not used (AP's in local mode) a large amount of informati...
I can find figures on the max number of AP's per HREAP group depending on controller model and WAN speed link. What about connected clients per HREAP group? When should a branch controller be used over a central controller using HREAP groups (based n...
Thank you for the reply, as mentioned I was looking for differences other than scalability or hardware, looking to see if one has any features the other doesnt.
Some information does go back to the WLC (mac, IP address and some other info), just not the statistics. I dont really understand why as surely those client statistics are seperate to the authentication. This limitation isnt mentioned anywhere, is it...
I found if I kept the AP in the HREAP group but unselected "H-REAP Local Auth" from the WLAN (see image), it would bring the client statistics through to the controller. In this configuration the controller is the authenticator, which is not desirabl...
I cant really take the AP's out of the HREAP group at the moment as I need to use local authentication (AP is the authenticator against RADIUS-802.1x). I perfomed a full authentication, got connectivity but this is all I see for client information (2...
